Ask Proxima Impact WSX Instrukcje Operacyjne Pobierz pdf (Strona 4)

Congratulations on purchasing the Gemini CDMP-6000 CD Player.

This state of the art professional table top CD player is backed by a 1 year

warranty*. Prior to use, we suggest that you carefully read all the instructions.

- Audio CD,CD-R, Mp3 compatible

- Plays mp3 files from USB storage device*

- BPM (TAP) Read Out

- Anti-shock using RAM buffer memory

- 2 Selectable Jog modes Pitch Bend/Search

- Multifunction scroll knob for Mp3 folder navigation

- Fader-Start capability

- One seamless loop per side with reloop

- Variable pitch control with three settings +/- 8,16 & 24%

- Fully programmable with repeat function

- 3-band EQ w/ Gain Control

-1/4” headphone output

- XLR and 1/4” mic input

- Auxiliary Inputs for Phono or Line devices

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5 mW

INTRODUCTION:

CDMP-6000

FEATURES:

SAFETY SPECIFICATIONS:

PRECAUTIONS:

CONNECTIONS:

MAIN POWER RECEPTACLE: This is a Standard 2-prong IEC power

connector. Connect the detachable linecord (included in the box with

your CDMP-6000) to the power receptacle, and plug the other end of

the linecord into an AC outlet. The CDMP-6000 has a universal power

supply that can accept any AC voltage from 100 VAC to 240 VAC.

No need for voltage select switches. It will work virtually anywhere in

the world. It is less susceptable to voltage sags or spikes than conven-

tional power supplies, providing greater electro magnetic isolation and

better protection against AC line noise

GROUNDING SCREW When using (a) turntable(s), you will need to

ground the RCA cable(s) by screwing in the grounding fork(s) to the

GROUNDING SCREW located on the rear panel of the CDMP-6000

mixer. Attach a PHONO (Turntable) ground line to the silver GROUND

THUMB SCREW that is situated at the bottom middle of the rear panel.

MASTER XLR OUTPUT (BALANCED): Allows you to connect bal-

anced XLR cables to MASTER OUTPUT of the CDMP-6000 both the

RCA and XLR outputs can be used at the same time but are both

controlled via the same MASTER OUTPUT.

MASTER RCA OUTPUT: The MASTER RCA output connects the

mixer to your main amplifier using standard audio cables with RCA-

type connectors.

The RECORD RCA OUTPUT output jacks can be used to connect the

mixer to the record input of your recording unit, thus enabling you to

record your mix with RCA cables.

CONVERTIBLE PHONO/LINE INPUTS: The CDMP-6000 has 2 CON-

VERTIBLE (Switched) PHONO/LINE (PH/LN) RCA INPUTS. The

switches which are located to the right and left of the RCA inputs for

channels 1 and 2 allow you to choose between a PHONO

(Turntable) input or a LINE level (Mp3, CD, Tape player etc..).and

require the proper switching. When switched to the PH position you

may use any Turntable with a magnetic cartridge, remember to con-

nect your ground wire (see GROUNDING SCREW) or there may be

a system hum.

MIC (MICROPHONE) INPUTS: The main MIC or Microphone inputs

are located at the back right hand corner and front middle of the

CDMP-6000 and will accept any balanced and unbalanced XLR as

well a standard 1/4” connector. You can control the gain for the mic

(See MICROPHONE VOLUME ABOVE ) above.CUE/PGM MIX RO-

TARY KNOB: The CUE/PGM MIX ROTARY KNOB adjusts the mix

between the CUE signal and the main output signal in your HEAD-

PHONE MONITOR OUTPUT.

POWER SWITCH: Once you have connected all your cables and

made sure that the VOLTAGE SELECTION SWITCH is set correctly,

you can turn the CDMP-6000 on by pressing the POWER button IN

to the ON position.

FUNCTIONS:

1. Do not use this CD player at temperatures below 41°F/5°C or

higher than 95°F/35°C.

2. The apparatus should not be exposed to dripping or splashing,

and no objects filled with liquids such as vases should be

placed on the apparatus.

3. Place the unit in a clean and dry location.

4. Do not place the unit in an unstable location.

5. When disconnecting the power cord from the AC outlet,

always grasp it by the plug. Never pull the power cord.

6. To prevent electric shock, do not remove the cover or the bottom screws.

7. There are NO USER SERVICEABLE PARTS INSIDE. Please

refer to a qualified technician.

8. Do not use chemical solvents to clean the unit.

9. Keep the laser pickup clean by keeping the tray closed.

10. Keep this manual in a safe place for future reference.

DISC TRAY: The DISC TRAY is where the CD is held during loading,

unloading and playback, and holds both 12 cm and 8cm CD’s.

(DO NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL

DAMAGE THE CD MECHANISM, USE THE OPEN AND CLOSE

BUTTONS)

EJECT BUTTON: Pressing the EJECT BUTTON will open or close the

DISC TRAY, unless the CDMP-6000 is in play mode, then you must

first stop the side you which to eject.

NOTE: To eject a CD you must be in CD mode,

simply press the USB/CD button and then press EJECT.

JOG WHEEL : In SEARCH MODE the JOG WHEEL can be used to

search forward or backwards in the music track, as well as for fine

adjustments to a CUE point in PAUSE mode. In PITCH BEND mode

the JOG WHEEL will function the same as the PITCH BEND allowing

you to speed up (FORWARD) or slow down (REWIND) the music

clockwise being (FORWARD) and counter clockwise being (REWIND).

JOG MODE BUTTON: When the JOG MODE BUTTON is illuminated

it indicates the the JOG WHEEL is in SEARCH MODE, and when not

illuminated it indicates that the JOG WHEEL is in PITCH BEND

MODE.

IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:

1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.

1 2 3 4 5 6 7 8 9 ... 22 23

Komentarze do niniejszej Instrukcji

Brak uwag

Ask Proxima Impact WSX Instrukcje Operacyjne Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Projektory Ask Proxima Impact WSX